FEATURES
Wide Paper Size
The 1050 series has a maximum printing area of 1,050 x 710 mm (S type) and 1,050 x 770 mm (XL types). The presses can also print on stock from a lightweight 0.04 right up to 1mm
|
PCS-L Printing Control System
Various settings from print makeready through to paper change, cleaning, registration and dampening volume control can be managed directly from the Ryobi PCS-L. Two types of settings can be managed simultaneously usingdual operation monitors. |
PQS Inline Printing Quality Control (opt)
The new Ryobi PQS offers a new and ingenious way to monitor ink density during the print run. A CCD camera mounted in the delivery section takes a digital image to measure the density of the colour bar on the printed sheet. Any correction values needed to match target densities are calculated and fed back into the system. Ryobi PQS is also able to detect print defects, such as hickeys and marking, alerting the operator to problems, and also tabbing the necessary sheets in the delivery stack for easy identification and subsequent removal. |
 |
Movable Shell Type Skeleton Transfer Drum (opt)
The Ryobi 1050 series employs a double diameter impression cylinder and a double diameter transfer drum. An optional movable shell type skeleton transfer drum accommodates different print stock types and thicknesses by shifting the shell, minimising the possibility of any marking of print stock. |
 Transfer Drum Air Guide Plate (opt)
The transfer drums are equipped with air guide plates to reduce the possibility of marking during high-speed printing.
|
Choice of four delivery systems
The delivery section comes in four configurations - extra long, long, semi-long and standard. An IR and UV curing unit can be mounted at the delivery end. Combining a coating and UV curing unit not only provides quick drying for a shorter delivery time, it also makes possible high-value-added printing such as printing on film, metallized paper and other non absorptive materials, as well as chemical embossed printing and lenticular printing.
Five colour with extra long delivery, coating unit and IR dryer/UV curing
|
Interdeck UV curing unit over the impression cylinder |
 |
Retractable coating UV/IR
The RYOBI 1050 series can be equipped with a chamber type doctor blade coating system for inline application of an aqueous or UV varnish coating. Besides adding value by protecting the printed surface or providing a glossy finish, faster drying enables shorter lead times. When the varnish coating system is not being used, the entire coating cylinder and anilox roller can be easily slid upward at the touch of a button to prevent marking on the sheet. |
F-RPC Fully Automatic Plate Changing (opt)
On the Full-RPC, plate mounting and removal is entirely controlled from the RYOBI PCS-L touch panel, and the operator is free to carry out other tasks while the plates are being automatically changed. The Full-RPC does not need to bend the plate's leading or tail edge |
S-RPC Semi Automatic Plate Changing (standard)
On the Semi-RPC, because the plates are set in place using positioning pins, high-precision plate mounting is easily accomplished with push-button control. The Semi-RPC does not need to bend the plate's leading or tail edge. |
Automatic Cleaning Devices
The 1050 series comes equipped with an automatic blanket cleaning device, Automatic Ink roller cleaning device, Automatic impression cylinder cleaning device (option) |
Ryobi Program Inking
Ryobi's program inking system automatically supplies ink to ink rollers to match the image from the early start of printing. After the set number of prints are finished, the ink on the rollers is automatically restored to an even state.
More info |
Impression Pressure Preset and Paper Size Preset (opt)
The Ryobi 1050 series allows the operator to enter preset values for paper size and thickness using the touch-panel display. The positions of the feeder head and delivery section guides as well as the pull side guides can be preset. An impression pressure preset system is provided as a standard feature |
Ryobi Print Density Control System (opt)
The Ryobi PDS, PDS-E Spectro AUTO, PDS-E Spectro, PDS-E AUTO and PDS-E Printing Density Control System measure the colour bar of the printed sheet using a spectrophotometer with special sensors (a densitometer is used for the PDS-E AUTO and PDS-E).
Values needed to correct the colour densities to match those of the OK sheet are calculated and provided as feedback to the Ryobi PCS, which appropriately adjusts the openings of the ink fountain keys. Quality control that previously relied on human experience and intuition is now done using precise numerical values, contributing to consistent printing.
Options vary depending on model.
More info |
Ryobi IVS
(Ink Volume Setter) (opt)
Image area calculation software. Converts digital artwork into ink duct profiles, dramatically reducing makeready times. Runs from a Windows PC, and has a similar structure to the popular Harlequin RIP system. Can be independent or piggybacked to your existing RIP.
More info |
MIS Connection Software (for CIP4-JDF) (opt)
Software to enable printing process management from a MIS (Management Information System). Boost productivity by integrating workflow including production, sales and administration |
Ryobi Print Job Manager (opt)
The Ryobi Print Job Manager connects RYOBI printing presses in a network to perform centralized production schedule management by optimally assigning job data to each press. It also gathers real time information on operating status and automatically generates productivity assessment data for each press. Print Job Manager is a powerful support tool for printing companies who want to boost productivity.
More info |
|
