|
| |
PlateRite 8300S |
PlateRite 8300E |
|
|
|
32-channel infrared laser diodes |
16-channel infrared laser diodes
|
|
Maximum 1,160 x 940 mm / Minimum 450 x 370 mm
(Supports B3 vertical size plates.)
(Minimum plate size 304 x 370 mm with factory option)
|
|
Maximum 1,160 x 924 mm/ Minimum 450 x 354 mm *
(Minimum exposure size 304 x 354 mm [12.0" x 14"] with factory option)
|
|
Thermal infrared sensitive plates
|
|
|
|
1,200/2,000/2,400/2,438
2,540/4,000*** dpi |
2,400/2,438/2,540*** dpi
(outputs at 1,200 dpi resolution after upgrading)
|
Repeatability |
+/- 5 microns **** |
|
13 plates/hr at 2,400 dpi
(1,030 x 800 mm plates)***** |
8 plates/hr at 2,400 dpi
(1,030 x 800 mm plates)*****
|
|
Fast PIF |
|
Semi-automatic loading (standard)
Fully automatic loading(optional)
|
|
Screen, Heidelberg, Protocol, Komori and others |
|
2,440 x 1,295 x 1,302 mm
|
Weight |
Approx. 1,150 kg |
Environment |
Recommended environment 23°C ±2°C (73.4°F ±35.6°F),
Operating environment 22°C ±4°C (71.6°F ±39.2°F),
40% to 70% relative humidity (non-condensing) |
Power requirements |
Single phase 200 V to 240 V, 32 A, 4.0 kW****** |
Standard accessories |
Blower unit |
* Use of 8-mm clamps results in 16-mm reduction of exposure size. Use of 12-mm clamps results in 24-mm reduction. Maximum drum speed of 600 rpm for 8-mm clamps or for plates smaller than 650 x 550 mm
** Up to 0.4 mm thick as a factory option.
*** When outputting at 4,000 dpi, confirm output quality before use.
**** Over four consecutive exposures on one plate at 23°C (73.4°F) and 60% relative humidity.
***** Output speed may vary depending on the sensitivity of the media and clamp size selection.
****** Also covers power requirements of SA-L, MA-L, AT-T, AT-M, and blower unit
|
